Publicité
Anleitung_E_EBH_750_SPK7__ 19.03.14 09:22 Seite 16
GB
10. Troubleshooting guide
Fault
Motor does not start
Motor performance
drops
Important note!
For protection, the motor is equipped with a thermal switch which cuts out when the motor is
overloaded and switches on again automatically after a short cooling period.
16
All manuals and user guides at all-guides.com
Possible causes
a) No power at the plug
b) Cable defective
c) Switch/plug block defective
d) Motor terminals or capacitor
disconnected
e) excessive working depth
a) Soil too hard
b) Blades badly worn
Remedy
a) Check the power cable and fuse
b) Check
c) By customer service workshop
d) By customer service workshop
e) Reduce working depth
a) Correct working depth
b) Replace hoe blades
Publicité
