Publicité
Functions & Operations
TIME (TMR)
Displays the workout time from 00:00 to 99.59
COUNT (CNT)
Accumulate the strokes from 0 – 9999.
CALORIES (CAL)
Shows the approximate value of calories burned during the workout from 0 to 9999.
Note: This data is a rough guide which can not be used in medical treatment.
DISTANCE
Displays the strokes per minute from 0 – 9999.
TOTAL COUNT (TOTAL)
Accumulates the total strokes from 0 – 9999 strokes. The value can't be reset except for removing the batteries.
SCAN
Automatically scans through each function: TIME – CALORIES – DISTANCE – TOTAL COUNT.
Note
1. Monitor requires two "AA" batteries.
2. The monitor will turn on automatically by pressing any key or when you start pedaling.
3. The monitor will turn off automatically if no signal is detected for four minutes.
4. To reset the TOTAL COUNT, you must remove the batteries.
5. If monitor is illegible or partial segments appear, remove batteries and wait 15 seconds to re-install.
6. The batteries must be removed and shall not e disposed in municipal waste. Dispose them according to the local
regulations.
All manuals and user guides at all-guides.com
EN
FR
5
Publicité
