Publicité
All manuals and user guides at all-guides.com
Installation
1. Take out the bracket from the box. Put the DC12V power cable
and network cable through the bracket and then fix it to the wall
(FIG.1 & FIG.2).
2. Take out the camera body and open the top cover with screw
driver (FIG.3).
3. Put the DC12V power cable and network cable through the
bracket rubber and then pull the cables through the bottom of
camera body (FIG.4). Connect the DC12V power cable to the
terminal and connect the network cable to RJ-45 slot of the
camera (FIG.5).
- 2 -
Publicité
