Publicité
All manuals and user guides at all-guides.com
Charge the Earphones
Put the earphones back into the charging case, and the earphones will power off and be
charged automatically. During charging, the earphone LED turns solid red; after fully charged,
LED turns off. When the battery is low, the LED indicator flash red.
4. Operating Instructions
4-1 Pairing Single Earphone with Your Device
1. Take out the L or R earphone from the charging case, it will automatically power on (LED
flashes Red and Blue alternately).
2. Turn on the Bluetooth on your device and choose Mixcder X1 to pair. The LED turns off when
the earphone pairs with the device.
4-2 Pairing the L&R Earphones with Your Device
1. Take out the L&R earphones from the charging case, and they will automatically power on
(LED flashes Red and Blue alternately) and pair with each other.
2. Once they successfully paired with each other, LED of one earphone goes off and the other
flashes Red and Blue alternately.
3. Please turn on the Bluetooth on your device and choose Mixcder X1 to pair. The LED turns
off when the earphones pair with the device.
Note:
If you have previously paired the earphones with a device, they will reconnect with the
device automatically when you turn them on.
5. Control Instructions
Function
Manually boot
Invoke voice assistant
Operation
Touch and hold the touch control for 3s.
In the standby mode (when connected with the device), touch L or R
touch control for 3 times.
EN-2
Publicité
