Publicité
Introduction for buttons on remote controller
9
TIMER ON :
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply
press this button again.
After press of this button,
setting. Within 5 seconds, press + or - button to adjust the time value. Every press of either
button changes the time setting by 1 minute. Holding down either button rapidly changes the
time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER
ON button to confirm.
10
SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this
function. This function is available in COOL , HEAT (Only for models with heating
function) or DRY mode to maintain the most comfortable temperature for you.
11
TEMP:
Press this button, could select displaying the indoor setting temperature or indoor
ambient temperature.When the indoor unit firstly power on it will display the setting
temperature, if the temperature's displaying status is changed from other status to"
displays the ambient temperature, 5s later or within 5s, it receives other remote control
signal that will return to display the setting temperature. if the users haven't set up the
temperature displaying status, that will display the setting temperature. (This function is
applicable to partial of models)
TURBO:
12
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed.
13
X-FAN
X-FAN function: in COOL or DRY mode,the icon
fan will continue operation for 10 minutes in order to dry the indoor unit even though you
have turned off the unit.After energization, X-FAN OFF is defaulted. X-FAN is not available
in AUTO,FAN or HEAT mode.
function: turn on the display's light and press this button again to turn off the display's
light. If the light is turned on ,
14
I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
15
/
P
ress this button to achieve the on and off of healthy and scavenging functions in
operation status.Press this button for the first time to start scavenging function;
LCD displays"
functions simultaneously; LCD displays"
time to quit healthy and scavenging functions simultaneously. Press the button for th
fourth time to start healthy function; LCD display "
the operation above. (This function is applicable to partial of models)
disappears and "ON "blinks .00:00 is displayed for ON time
:
". Press the button for the second time to start healthy and scavenging
is displayed and the indoor
is displayed. If the light is turned off,
" and "
11
" . Press this button for the third
". Press this button again to repeat
",
disappears.
Publicité
