Publicité
FLAT-PAK
SERIES
™
Model FP-TPS4A
Format-A Two-Pair Audio Sender
RJ45 conductor colors shown are for 568A standard. The 568B standard may be used if the connectors at both ends of the cable are wired identically.
TYPICAL PERFORMANCE
Inputs (3):
Input Connection:
Input Level:
Format-A Signal Pairs Used (2):
Output:
Output Connection:
Frequency Response:
THD+N:
Noise below +4 dBu:
Crosstalk:
Headroom above +4 dBu:
Indicator:
Power Connection:
Power Requirement:
Maximum Load Current:
Dimensions:
891-2175A
All manuals and user guides at all-guides.com
RJ45 Standard Wiring
Pair A: Audio +4 dBu
Pair B: Audio +4 dBu
Pair C: Audio +4 dBu
Pair D: Power +24 Vdc
20 kΩ unbalanced (2, left and right); 100 kΩ balanced (mono amplified)
Phono Jack (Unbal.); Mini-jack (Bal.)
-10 dBV unbalanced; 1 W (8 Ohms) to 10 W (8 Ohms) balanced, 2 W nominal
B, C
RDL TP Format-A
RJ45
10 Hz to 50 kHz (+/- 0.1 dB)
< 0.05%
< -85 dB
< -85 dB (10 Hz to 10 kHz); < -80 dB (10 kHz to 20 kHz)
> 18 dB
Power (Input and outputs active)
Power Jack (locking)
24 Vdc @ 30 mA plus connected loads
500 mA
4.15" (10.5 cm) L; 3.25" (8.6 cm) W; 1.68" (4.27 cm) H
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Installation/Operation
(1)
+ White / Green
(2)
– Green
(3)
+ White / Orange
(4)
– Blue
(5)
+ White / Blue
(6)
– Orange
(7)
+ White / Brown
(8)
– Brown
Tab on bottom of connector
EN55103-1 E1-E5; EN55103-2 E1-E4; EN60065
Typical Performance reflects product at publication time exclusive of EMC
data, if any, supplied with product. Specifications are subject to change
without notice. This product is Professional Apparatus.
Publicité
