Publicité
STEP 8
Hang the Lift Arm
on the Carrier by hooking
2
the slotted area of the Lift Arm under the top bar
of the Carrier. Lift Arm must be inserted from the
front and then lowered which fastens Lift Arm into
place. Insert Clevis Pin
20
Carrier and lock by fastening the Hair Pin
the Clevis Pin.
STEP 9
Slide Lift Arm Inserts
6
Lift Arm
and secure with Push Pins
2
STEP 10
Ready the Wheel Pads
port Rods
and Hair Pins
11
STEP 11
Slide the Wheel Pads
5
Lift Arm Inserts
and secure with Push Pins
6
Note: The Wheel Pads can be moved in or out to fit dif-
ferent mower widths. Use the configuration that works
best with your model of lawn mower.
Assembly Instructions
through the hole in the
to
22
into both sides of the
as shown.
21
Lift Arm Insert 6
for installation by adding Sup-
5
.
22
onto both sides of the
21
THIS COMPLETES ASSEMBLY.
MoJack PRO Lift
Lift Arm 2
Lift Arm 2
Push Pin 21
Wheel Pad
Hair Pin 22
5
Wheel Pad
.
9
Top Bar of Carrier
Carrier
Support Rod 11
21
Push Pin
Lift Arm Insert 6
22
Hair Pin
20
Clevis Pin
21
Push Pin
Lift Arm Insert 6
Publicité
