All manuals and user guides at all-guides.com
Charging jack - Used to charge ni-cad batteries inside the
unit - requires Maxon DV-7510 AC/DC wall charger (not
shown) • Enchfe para cargar - Utilizado para cargar las
baterías de níquel-cadmio dentro de la unidad - requiere un
cargador de Maxon DV-7510 AC/DC de pared (no se
muestra) • Prise de chargement - est utilisée pour charger
les piles dans l ' appareil - requiert le chargeur au mur c.a./c.c.
Maxon DV-7510 (non montré)
OPERATING INSTRUCTIONS
1) Remove the battery compartment door
by pulling the door tab towards you. Install three
fresh AA batteries, noting the polarity diagram
embossed in the battery compartment. For
continuous, heavy-duty use, alkaline batteries
are recommended.
NOTE: Rechargeable ni-cad batteries can
be used in the 49-HX. To recharge them while
installed in the unit, Maxon's DV-7510 optional
AC/DC wall charger must be used. Average
charging time is 12-16 hours.
CAUTION: Do not attempt to recharge alkaline
or carbon zinc batteries - this could result in an
explosion, or other damage to the unit.
8