Zippity wf29002 Instructions D'assemblage

Tall 42in Zippity Garden Fence
(5 Pack with Stakes)
Check Box for These Contents
In the event of missing or defective parts please call our customer service department at 877-234-6196 (Mon-Fri 8AM to 5PM ET).
1. Metal fence panels (5)
2. Metal stakes (6)
Tools You Will Need
• Rubber mallet or a hammer and block of wood
Insert stake through the 4 eye holes of side A
of the fence section and use a rubber mallet
drive the stake into the ground until it can go
no further. Alternately use a hammer and a
block of wood to protect the stake. Avoid
metal pounding on metal as it could remove
the protective surface of the stake and cause
it to rust, voiding the warranty.
Line up the second panel with the first,
ensuring that side A of the second panel butts
up with side B of the first panel. Drive the
stake through all 8 eye holes and into the
ground until it can go no further.
Repeat for all 5 sections.
support@zippity-outdoor.com Toll Free Phone: 1 877 234 6196
B OX CO N T E N T S
A S S E M B LY I N S T R U C T I O N S
1
2
3
1
A
3
2
B A B