Publicité
Step 1
Requires: Shelf Body (1), Level, Pencil, Screwdriver, Pelican Brackets (2)
and Set Screws (5)
Use stud finder (not included) to find studs in the desired mounting area. Place shelf (1) in the
desired position. Use a level (not included) to ensure the shelf (1) is level and use the pencil
(not included) to mark the approximate location of the pelican brackets (2). Adjust set screw
(5) in bottom of pelican bracket (2) to release top clamp.
1
Step 2
:
Pelican Bracket (2), Pencil, Installation Screws (3), Screwdriver
Requires
and Drywall Anchors (4) (if no stud)
Place each pelican bracket (2) against wall in the desired position and mark holes with a pencil
(not included) where holes in pelican bracket (2) meet the wall. Use the lines previously drawn
to verify that the holes are straight. Secure pelican brackets (2) using the installation screws
(3) with the screwdriver (not included). If not installing directly into studs, ensure the installa-
tion screws are installed using the drywall anchors (4).
Step 3
:
Shelf (1), Pelican Brackets (2), Set Screws (5) and Screwdriver
Requires
Slide shelf (1) into pelican brackets (2). Use the screwdriver (not included) to tighten the set
screws (5) to secure shelf (1).
All manuals and user guides at all-guides.com
2
5
a
2
b
1
5
3
2
5
4
3
Note:
If wall studs
are available skip a
3
Publicité
