Publicité
Thank you for purchasing this appliance. To ensure perfect operation and security, please read the manual
carefully and retain it for future reference. This manual can be downloaded from our site.
Specifications:
•
Cardioids polar pattern can reduce the
feedback as less as possible.
•
The clear tone quality.
•
The solid metal structure used from high
quality materials.
•
Cigar shape for simple and easy placement.
•
Stable and reliable.
Technical specifications:
•
Element: Pressure Gradient
•
Polarity: cardioid.
•
Capsule: Ø 22mm.
•
Frequency
Response: 30Hz-20kHz.
•
Output
Impedance: 100Ω ±30% (at 1KHz).
•
Sensitivity:
- 38±2dB (0dB=1v/pa at 1KHz).
•
Self Noise:
20dB A (IEC 581-5).
•
Max Input
SPL: 134dB (à 1kHz≤1% T.H.D).
•
S/N
Ratio: 74dB.
•
Low Frequency
100Hz.
•
Power: 48V DC Phantom (±5V).
•
Net Weight: 120g
Connecting and Disconnecting the Microphone Cable:
1. Insert the XLR connector into the microphone. If necessary, rotate the connector to align the key on the
connector and the groove in the microphone. Push the connector into the microphone until clicks.
2. To disconnect the cable and microphone, grasp the connector while depressing the tab. Pull the
connector away from the microphone.
"Low cut" switch:
•
Position "-": no attenuation.
•
"┌" position: reduces the proximity effect
while minimizing the lowest frequencies.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
All manuals and user guides at all-guides.com
PROFESSIONNAL STATIC MICROPHONE
Transducer.
Attenuation: 12dB/oct at
Page 4
Publicité
