Publicité
Electronical consideration
CONTACT ARRANGEMENT – PSV & FAN version
The EFFI-SHARP is supplied with a 24V constant voltage. The power consumption depends on the LED version (MX1 or MX2) and on the intensity
which flows through the LED. It is comprised between 45W and 90W.
Pin
Cable color
Contact arrangement
number
1
Brown
2
White
3
Blue
4
Black
5
Grey
(1) If the AIC is not connected, the light will light on at 100% as if V
MODES CONTROL
MODE
The LED driver inside the product is set to automatically
pulse the LED.
If you trigger light for a short pulse (< 100 µs), light is pulsed
(LED are driven at 2A).
If your pulse is longer, light automatically decreases LED
Auto-Strobe
current to protect LED against failure.
mode
To protect LED, the product will enter in protection mode
(Light is OFF for 2 second) if the duty cycle is superior to 0.3.
Every 2 seconds, the product will check if duty cycle is correct
to restart.
If you set trigger NPN (or PNP) continuously ON the light will
run continuously with a 700 mA LED current.
Continuous
mode
By adjusting the analog voltage, light intensity can be
controlled from 10% to 100%. If the Input AIC is not
connected, the EFFI-SHARP will act as if AIC was set at 24V.
Analog
•
Intensity
•
Control (AIC)
•
•
All manuals and user guides at all-guides.com
High power shape projector
CONVENTION CABLE M12
Designation
+24V
NPN
GND
PNP
M12 male connector
AIC*
=24V. If you don't need to adjust light level do not connect/use this PIN.
AIC
DESCRIPTION
0 – 3V: LED OFF
3 – 10V: ≈10% to 100% light intensity
10 - 24V: LED ON 100%
100% if not connected
Mini Parc du Verger – Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
Details
+24V
NPN [triggered on falling edge] -
Max 24V
(Light ON if V
< 1.5 V / OFF if
NPN
V
> 3V)
NPN
GND
PNP [triggered on rising edge] -
Max 24V
(Light ON if V
> 4.5 V / OFF if
PNP
V
< 3V)
PNP
AIC (Analog Intensity control)* -
Max 24V
If D=Duty cycle (ON
→ Light shutdowns for 2 seconds
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: contact@effilux.fr
USER'S GUIDE EFFI-SHARP-V2
Version 2.1.2020
Last update: June 17, 2020
Max Power Consumption
(with MX2 LED version)
2,6A@24V (strobe)
1,65A@24V (continuous)
12mA@3,5V
3mA@5V
0,5mA@10V
0,15mA@24V
/
12mA@24V
3mA@10V
0,5mA@5V
0,15mA@3,5V
3mA@24V
SCHEME
/ (ON
+ OFF
)) > 0.3
TIME
TIME
TIME
Page 3 / 4
Publicité
