Publicité
Pair with Bluetooth-enabled Device Using
One Touch (NFC)
Using an NFC compatible bluetooth device, you can
establish a bluetooth connection by just touching the
unit with it.
- Make sure bluetooth and NFC function is enabled
on your device.
1. Turn on the NFC function on your device.
- Make sure your device is in the wake-up mode.
2. Turn on the unit and switch to bluetooth source.
3. Touch the NFC sensing area with your device, the
unit will pair and connect with your device.
4. Touch this area again, the unit will disconnect the
bluetooth connection.
Tips:
Some NFC-enabled mobile devices cannot pair
directly with the unit via NFC, please try either one of
the solutions below:
• Please download the Apps "Tap-and- Pair" from
Google Play Store(https:// play. google. com) and
install.
• Pair with the unit manually first, then touch again on
the NFC sensing area.
Listen to music from Bluetooth device
• If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the
player.
• If the device also supports Audio Video Remote
Control Profile (AVRCP) profile, you can use the
player's remote control to play music stored on the
device.
16
All manuals and user guides at all-guides.com
1. Pair your device with the player.
2. Start play music via your device (if it support
A2DP)
3. Use supplied remote control to control play (if it
support AVRCP)
- To pause/resume play, press the
remote control or button
- To skip to a track, press the
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the apparatus is
connected properly.
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button, first select
the correct source.
- Reduce the distance between the remote control
and the unit.
- Insert the battery with its polarities (+/-) aligned as
indicated.
- Replace the battery.
- Aim the remote control directly at the ensor on the
front of the unit.
No Response From the Unit
- Disconnect and reconnect the AC power plug, then
turn on the unit again.
button on
on front panel of unit.
/
buttons.
Bluetooth NFC Speaker
Publicité
