Publicité
Audio operation
Use the 3.5mm-RCA Audio cable (included) to connect the unit with Disc
player/MP3 player/phone/computer or other music device.
1. Connect one end of the Audio cable to the R/L Audio-in Jack on the back
panel of the unit, then connect the other end to the MP3 player.
2. Press the MODE
on remote to switch to Aux in mode (Aud-1/ Aud-2).
3. Press the AUX 1 button to enter the Aud-1 mode and start playback by the
device connected to the R/L RCA Jack.
4. Press the AUX 2 button to enter the Aud-2 mode and start playback by the
device connected to the 3.5mm Aux in Jack.
Disc player
FM operation
1. Adjust the FM antenna to get the best reception.
2. Press the MO/ST button to turn stereo on.
3. Press the MODE
4. Press the
/
5. Press the
/
6. Press and hold the
7. Press the SEARCH button on the remote control to search the stations,
press again to stop searching.
8. Save (60) stations:
Press the NUMBER buttons to select the preset number, then press the
T/F button and input the frequency, at last press the SAVE button to save
the station.
E.g. to save the 107.5MHz into preset 36. Press the NUMBER button 10+,
6, then press T/F and input 1, 7, 5, 0, at last press the SAVE button.
All manuals and user guides at all-guides.com
button on the top panel or press the AUX1/2 button
FM antenna
FM
AUX IN
button to switch to the FM mode.
button to skip to the previous or next station.
button on remote to tune the frequency by 0.05MHz.
/
button on remote to skip to strongest station.
9
MP3 player
AUX
Publicité
