Publicité
Windows Live Messenger (Windows only)
Connect the Macally MegaCam to your computer (connected
to the Internet), log-on to Windows Live Messenger. In the
menu bar, select "Tools", then "Audio and video setup..." and
follow the instructions. In "Step 2: Microphone Setup" select
USB 2.0 Camera and in "Step 3: Webcam Setup" select USB
Video Device. Click "Finish" to close the Window. Then, in the
menu bar select Video and " Show your webcam...". Right
click on an online contact to pop down the menu and select
"Start a video call". Once you are connected, your contact will
see you as shown below.
Frequently Asked Questions
Q: Do I need to purchase additional software to make the
Macally MegaCam work with iChat?
A: No. The Macally MegaCam is automatically recognized
by iChat.
Q: Can I run multiple video conferencing applications simulta-
neously while using the Macally MegaCam?
A: No. You can only use the Macally MegaCam with one video
conferencing application at the time.
Q: Why don't I see any video?
A: If there is no video, restart your computer and run one video
conferencing application only. If there is still no video, in Mac
please try to reset the PRAM by restarting your computer and
immediately press and hold down 4 keys simultaneously:
Option, Cmd (Apple key), P and R. Hold down these keys until
the Mac sounds chime three times.
Q: Can I use the Macally MegaCam with a new iMac, MacBook,
MacBook Air or MacBook Pro with built-in iSight camera?
A: Yes. You can use the Macally MegaCam, instead of the built-
in iSight camera, to capture video and photos all around your
computer with more flexibility.
Q: Will the Macally MegaCam cause any conflict with the com-
puter's built-in microphone?
A: No. The Macally MegaCam's built-in microphone is USB
Audio type and will not cause any conflict with your compu-
ter's internal microphone. Please note, if the audio does not
work after you have tried all things, you might need to confi-
gure Audio Input source from Sound in System Preferences of
Mac OS X or from Sounds and Audio Devices of Control Panel
in Windows XP and Vista.
Q: My MegaCam video image is blurry. What can I do to obtain
a clearer image?
A: Please adjust the focus by turning the Focus Adjust Ring on
the Macally MegaCam.
Q: Can I plug the Macally MegaCam to an USB 1.1 or keyboard's
USB port?
A. No, you can't. The Macally MegaCam requires more power
than USB 1.1 or a keyboard's USB port can provide. Please
connect the Macally MegaCam to a computer with a built-in
USB 2.0 port or an AC powered USB 2.0 hub.
Q: What other applications work with MegaCam?
A: On a Mac, PhotoBooth, iStopMotion and Delicious Library
are tested and work with the Macally MegaCam. However, as
the operating system and software develops, the compatibi-
lity might change, please test the Macally MegaCam with your
desired application to find out.
3
Publicité
