Driving with the electric scooter
Accelerator and Zero Start
To accelerate the scooter press the thumb throttle on the right side of the handle bar.
For safety reasons, the Micro X21 has to reach 5 km/h while pressing the thumb throttle
and scooting at the same time in order to engage the motor.
Brakes
This scooter is equipped with 1 mechanical brake (disk brake on the rear wheel activate
by the handle lever) and one electric/motor brake activated by the thumb throttle on
the left side of the handle bar.
Whenever possible, use both brakes at the same time during braking.
Change the brakes during long downhill rides to avoid overheating.
Micro_X21_Book.indb 21
Micro_X21_Book.indb 21
WARNING
WARNING
Ride slowly to become accustomed to the
novel riding sensation, especially when
riding for the first time. Always be aware that
travelling at higher speeds on the electric
scooter will also result in a longer braking
distance.
Damp or wet road surfaces result in a longer
braking distance. Be careful and reduce the
speed on slippery or uneven road surfaces.
21
21.06.21 16:08
21.06.21 16:08