Care And Storage; Troubleshooting Guide - senya SYCP-HB002 Notice D'utilisation

The product has an auto memory function. This function allows you to add more ingredients
in the jug during the cycle, while keeping the setting selected at the beginning.
1. Unplug the product or remove the lid to put it in pause mode.
2. Carefully remove the lid and add the ingredients in the jug.
3. Replace the lid and reconnect the product. The product will resume the cycle at the
point where the previously selected setting was paused.
Note :
Please note that the auto memory function will keep for about 3 minutes after
-
unplugging or removing the lid
IV. CARE AND STORAGE

Always unplug the appliance and wait for its complete stop before dismantling it.

Never immerse the motor unit, its power cord or its plug in water or any other liquid.
Clean them with a soft, damp cloth.

Clean the surface of the soup maker base unit and lid with a soft, damp cloth.

Warning: The blades cannot be removed and are very sharp; be extremely careful
when cleaning the inside of the bowl.
V. TROUBLE SHOOTING GUIDE
Problem
The product does not turn on
Product does not turn on or stop during use
Foods are not well mixed or not well cooked
Auto memory function
Solution
Check that the power cord is firmly seated in
the product, plug the power cord into the
socket
Check that the lid is closed properly
Check that you have respected the min and
max levels
Check that the food has been cut into small
cubes (2-3 cm)
42