Télécharger Imprimer la page

RF Solutions TAURUSDIN-8S4L Guide De Démarrage Rapide page 2

Publicité

TAURUSDIN Quick Start Guide
RF Signal LED
Flashes briefly when a compatible RF signal is received (even when transmitter is
unpaired).
Indication LEDs
Normal Operation: Indicates the output relay status.
Self Test Mode: indicate Received RF Signal Strength.
Factory Default Modes of Operation
SLIMDIN is factory shipped with the following configuration.
All Relays Momentary operation.
RF MODE is FM.
WATCHDOG is DISABLED.
SLIMDIN can be Configured to Several Modes of operation
Menu 1: configures Relay outputs Operation according to the Table below.
Menu 2 configures Time Delays on the Relay Outputs.
Menu 3 configures the RF MODE.
Menu 4 configures Watchdog.
Note:
For Information, please see Datasheet or our online Videos!
Self Test / Walk Test Mode
To enter Press and hold Learn and Mode Switch together then apply power.
The module will now perform the following
1.Operate Relay's 1-4
2.Await user press M Switch
3.Momentarily Operate LEDs 1-4, then RF Signal LED
4.Enter Walk Test Mode , LEDs' 1-4 indicate RF Received signal Strength
Note:
It is recommended for reliable operation to have at least one LED illuminating
QS-TAURUSDIN-2
All manuals and user guides at all-guidesbox.com
TAURUSDIN Quick Start Guide
Restore to Factory Default Settings
This completely erases, timers modes, Watchdog and resets the Module to Factory
Defaults;
1.Press and hold Mode Switch for approx.10 seconds.
2.When All LEDS Fast Flash together al user configuration is reset
Note:
This does not Erase Paired Transmitters.
To erase all Transmitter Pairings and you must also "Erase all Transmitters"
Operation
Battery
Battery
Low
Low
or
or
Recharging
Recharging
Recharging using USB Cable
Connect using the USB Type C
Connector
Recharging the Battery
Taurus contains an internal Lithium battery which can be recharged via the USB
connector or, using a wireless charging pad.
RF Transmit
RF Transmit
(Green LED)
(Green LED)
Low Battery: If battery requires recharging
Low Battery LED illuminates for 3 seconds
after each operation.
When Charging the
RED
Flashes slowly to show charging is in
progress. When fully charged the
is illuminated.
Wireless Recharging
Taurus is compatible with the QI standard
(Most mobile phone standard Wireless
charging pads)
QS-TAURUSDIN-2
Battery LED
GREEN
LED

Publicité

loading

Ce manuel est également adapté pour:

Taurus-8t4Slimdin-8r4