EisSound KBSOUND KIT-SELECT Manuel D'utilisation page 11

5. Selecting Turn-On Mode
All manuals and user guides at all-guides.com
If the Turn-On mode is set to "off",
when power is fed to the unit, it will
This function is designed for use in the event that the
power supply is fed by a specifically designated switch. In this case, the
automatic activation mode must be programmed in order to automatically
turn on the ® unit when the switch is activated.
kb
sound select
These steps must be followed:
1. Supply power to the
switch. The
kb
sound select
and turn off.
2. Turn on the
kb
sound select
(ON/OFF key).
3. With the ®
kb
sound select
key pressed down for 5".
If the Turn-On mode is set to
"on" in this state, when
power is fed to the unit, it will
turn on in "ideal" mode (see
Chapter 6. "Ideal Mode").
turn on in "off" mode.
®
kb
sound select
® unit by flicking the
kb
sound select
® unit will flicker a couple of times
® unit using the remote control
unit turned on, keep the ON/OFF
Key Sequence Display
5''
AUTO x
5''
9
ENG