FLAT-PAK
SERIES
™
Model FP-TPSR4A
Format-A Two-Pair Audio Sender/Receiver
RJ45 conductor colors shown are for 568A standard. The 568B standard may be used if the connectors at both ends of the cable are wired identically.
TYPICAL PERFORMANCE
Sender Section
Inputs (3):
20 kΩ unbalanced (2, left and right); 100 kΩ balanced (mono amplified)
Input Connection:
Phono Jack (Unbal.); Mini-jack (Bal.)
Input Level:
-10 dBV unbalanced; 1 W (8 Ohms) to 10 W (8 Ohms) balanced, 2 W
nominal
Format-A Signal Pairs Used (2): B, C
Output:
RDL TP Format-A
Output Connection:
RJ45
Frequency Response:
10 Hz to 50 kHz (+/- 0.1 dB)
THD+N:
< 0.05%
Noise below +4 dBu:
< -85 dB
Crosstalk:
< -85 dB (10 Hz to 10 kHz); < -80 dB (10 kHz to 20 kHz)
Headroom above +4 dBu:
> 18 dB
Indicator:
Power (Input and outputs active)
Power Connection:
Power Jack (locking)
Power Requirement:
24 Vdc @ 35 mA plus connected loads
Maximum Load Current:
500 mA
Dimensions:
6.58" (16.7 cm) L; 3.25" (8.6 cm) W; 1.68" (4.27 cm) H
891-2180A
All manuals and user guides at all-guides.com
RJ45 Standard Wiring
Pair A: Audio +4 dBu
Pair B: Audio +4 dBu
Pair C: Audio +4 dBu
Pair D: Power +24 Vdc
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Installation/Operation
(1)
+ White / Green
(2)
– Green
(3)
+ White / Orange
(4)
– Blue
(5)
+ White / Blue
(6)
– Orange
(7)
+ White / Brown
(8)
– Brown
Tab on bottom of connector
Receiver Section
Input:
Input Connection:
Format-A Signal Pairs Used (2):
Output:
Output Connections (2):
Frequency Response:
THD+N:
Noise below +4 dBu:
Crosstalk:
Headroom above -10 dBV:
CMRR:
EN55103-1 E1-E5; EN55103-2 E1-E4; EN60065
Typical Performance reflects product at publication time exclusive of EMC
data, if any, supplied with product. Specifications are subject to change
without notice. This product is Professional Apparatus.
RDL FORMAT-A
RJ45
B (Left); C (Right)
100 Ω unbalanced
RCA Phono stereo
10 Hz to 40 kHz (+/- 0.1 dB)
< 0.005%
< -90 dB
< 90 dB (1 kHz); <75 dB (20 Hz to 20 kHz)
> 20 dB
> 65 dB (50 Hz to 150 Hz)