Publicité
C 20
6. Display shows
. Change this to
the PRINT (Enter) button.
C 30
a. Display shows
C 30
is short for Code 30, which signifies the
date format.
b. Change the number on the right to achieve
desired date format (see below) and press the
PRINT (Enter) button.
• #1 = mm.dd.yy
• #2 = dd.mm.yy
• #3 = yy.mm.dd
1. To change the printing mode, press the SEL button
on the printer once and the green status light should
be on. If the green status light is already on, then
pressing the SEL button is not necessary because
the printer is already in printing mode.
2. Press the PRINT button on the indicator and the
printer should start printing. Remember to set up the
indicator correctly to enable the printing function.
OPERATING ISSUE
The printer is not working.
Call Uline Customer Service at 1-800-295-5510 for any technical questions or issues.
PAGE 2 OF 6
All manuals and user guides at all-guides.com
SETUP CONTINUED
C 30
and press
and a number on the right.
HOW TO PRINT
TROUBLESHOOTING
1-800-295-5510
7.
Press the COUNT button to exit.
8. Display is now set up to match the printer. Press the
PRINT button on the LP-7510 display and the printer
should print.
3. Repeat step 2 to print multiple readings from the
indicator.
4. After printing is done, press the SEL button once to
exit the printing mode. The green status light should
now turn off.
5. To roll paper out, press the LF (Line Feed) button.
Press LF button again to stop line feed.
RECOMMENDATIONS
Ensure the printer is connected to power.
Ensure the thermal paper inside the printer is placed
correctly.
Ensure the cover of the printer is closed completely.
Ensure the indicator is set up to have the print function
activated.
uline.com
0621 IH-4601
Publicité
