Publicité
All manuals and user guides at all-guides.com
References and symbols marked
on the instrument:
CAT III
Measurement Category III is applicable to test
and measuring circuits connected to the distri-
bution part of the building's low-voltage Mains
installation. Examples are measurements on
distribution boards (including secondary
meters), circuit-breakers, wiring, including
cables, busbars, junction boxes, switches,
socket-outlets in the fixed installation.
The instruction manual contains infor-
mation and
for safe operation and maintenance of
the instrument.
Prior to using the instrument the user is
kindly requested to thoroughly read the in-
struction manual and comply with it in all
sections.
Failure to read the instruction manual or
to comply with the warnings and refe-
rences contained herein can result in se-
rious bodily injury or instrument
mage.
prevention regulations established by
the professional associations are to be
strictly enforced at all times.
Brief Description /
Scope of Supply
The handheld BEHA-AMPROBE Phase Rotati-
on Indicators are applicable in various areas
and different mains voltage. The test instru-
ments are built in compliance with the most
recent safety regulations and ensure safe
and reliable testing.
• Display of all three phases via LED or glow
lamps
• Display of phase rotation direction via
glow lamps/LCD-Segments
Warning of a potential danger, com-
ply with instruction manual.
Caution! Dangerous voltage. Danger
of electrical shock.
Reference. Please use utmost attenti-
on.
Continuous double or reinforced in-
sulation complies with category II
IEC61140.
Symbol for the marking of electrical
and electronic equipment (WEEE
Directive).
Conformity symbol, the instrument
complies with the valid EU directives.
The
references,
respective
necessary
da-
accident
Publicité
