Publicité
This unit receives its operating power from the AC Power Source.
When Power is in ON position, pressing { D/# ] key will only print
the digits displayed in the front display panel
B. Loading Paper
1) Place paper holders into position (Fig. I).
2) Install the paper roll on the holders
3) Insert the paper end into printer slot (Fig. II).
4) Press | fgfl ] key to feed the paper to an adequate length.
4
If the printing becomes faint, the ink ribbon may need to be replaced.
1) Turn the power off.
2) Open the printer cover (Fig. III).
3) Remove and discard the old ribbon and spools.(Fig. IV).
4) Replace the new ribbon (red to the bottom) by installing the spools in the reverse sequence.
Fig m
Fig IV
CAUTION: Turn the power off before replacing ink ribbon.
DISPLAY SYMBOL
M
: A number has been stored in Memory
E
: Error or overflow of capacity
: The display value is negative
GT
: Grand total
5
Publicité
