Publicité
• The blind rivet adapter can be turned
by 360°.
PRESSURE ADJUSTMENT
Set the pressure on the GYSPRESS to maximum. 8 bar max.
NOSE PIECES CHANGE
To facilitate the installation of the
nozzles:
• Position a rivet in the nozzle
• Insert the rivet between the jaws
• Tighten the nozzle
• Use a 12 mm open-end wrench.
• 4 nose pieces are supplied with the
blind rivet adapter.
• Measure the diameter of the mandrel
to know which nose piece to use.
This table specifies which nose piece
to use depending on the diameter of
the blind rivet mandrel.
All manuals and user guides at all-guides.com
BLIND RIVET ADAPTER FOR
GYSPRESS 8T/10T
Blind structural rivets
Ø 4.8 / 7.8
Adapter
Part numbers
Ø 3.2
059221
Ø 3.5
059238
Ø 4.0
059245
Ø 4.5
059252
EN
7
Publicité
