Icy Dock ICYCube MB561U3S-4S R1 Manuel D'utilisation page 7

C. 2.5" or 3.5" drive installation.
2.5" HDD/SSD
D. Re-insert the drive tray with the hard drive into the device.
Cable and Connections
Connect the power cord and USB 3.0 or eSATA to the specified ports on both your
system and the unit. Turn on the power switch located at the rear panel of the device.
Note:
USB 3.0 & eSATA cannot be connected at the same time. Connect only one for
proper function.
If your system cannot detect the device or hard drives, please go into device
management to search for connected device or hard drives. Please contact us
for additional troubleshoot if it does not appear in device mangement.
It is recommended users to "safely remove the drive in system" before powering
off the device or swapping out the drive(s).
English
3.5" HDD
Use the included #6-32
screws for 3.5" drives
05