Loewe L2600 Instructions De Montage page 16

Fig. 3
Fig. 4
TV sets types:
Push the tuner connection through the opening in the corresponding TV set as shown on
pages 46 and 47, fi g. 27 to fi g. 34
If necessary, use the cover (3) shown on page 47, fi g. 32 to 34.
Plug the module DVB-S Frontend (2) into the pin base (fi g. 27, arrow 1, chassis L2600 or fi g.
30, arrow 1, chassis L2650) of the appropriate TV set.
Make sure that the contacts are locked (page 48, fi g. 35, arrows).
Fix the module with the screw (5)/ the screws (5) in the appropriate TV set as shown on page
46, fi g. 29, arrow E / page 47, fi g. 31 and fi g. 34, arrow E.
Tighten the screw / screws.
The cover (3) is not required:
- if you fi nd the recess as shown in fi g. 3
and the retaining arms (arrows) are in place
The cover (3) is required:
1
- if the part shown in fi g. 3 is missing from your TV set
already (broken out as shown in fi g. 4)
- another cover unsuitable for Sat
has been used (e.g. for a PIP tuner)
Xelos A32, Xelos A37, Modus 32, Modus 37,
Concept L26, Concept L32,
Individual 26, Individual 26 Selection,
Individual 32, Individual 32 Selection,
Individual 40 Selection
Spheros R32 und Spheros R37
16