Télécharger Imprimer la page

PCWork PCW12D Mode D'emploi page 2

Publicité

The product uses alkaline batteries.
Remove the batteries if the product is not
going to be used for a long time to prevent
leakage.
Never use the device if it is damaged.
Be sure that your product does not
experience extreme loads, such as high
heat or excessive mechanical stress.
Use a soft, dry cloth for cleaning. Never use
acid, alkaline, solvents or alcohol.
Any change related to the design or
construction of the device is not permitted.
Maintenance should only be carried out by
licensed professionals.
Warranty and any liability in regards to
material damage or personal injury are
suspended in the following cases:
¨
Improper usage of the device
¨
Not following the instructions and safety
regulations provided by the manual
¨
Usage and installation of non-approved
spare parts
¨
Improper
maintenance
related to the design or construction of the
device; removal of the type plate.
Operating Elements:
1.) On/Off button
2.) Function button
3.) Capacity display
Operation: Light Functions (Main / COB Light)
By pressing the ON / OFF button the main light is
switched on or off or dimming is activated.
Press once: main light (focussed, white) 100 %
and
changes
Press twice: main light (focussed, white) ca. 40 %
Press three times: COB light (diffuse, white) – 100 %
Press four times: COB light (diffuse, white) – ca. 40 %
Press five times: OFF
2
1
2
3

Publicité

loading