Publicité
Before first Use
Dispose of packaging material or store it in a safe place. There is
risk of suffocation for small children!
Assembly and Charging via Sun Light
1. Connect the power cable of
the pump to the PUMP
socket (7) on the solar
panel.
2. Connect the power cable of
the
illumination
LIGHT socket (6) on the
solar panel.
3. Fill the tub of the fountain
with water. The pump must be fully covered
with water. Please note that the pump will be
destroyed when run dry! If too much water
evaporates on hot summer days fresh water
should be added to keep the pump sub-
merged.
4. Make sure direct sunlight shines on the solar
module when selecting the right place for the
solar module. By this way the built-in battery
will be charged.
Charging the Solar Module with the Charger
1. Remove the plug from the charging socket CHARGER (3).
2. Connect the plug of the battery charger with the socket
CHARGER and the power plug with a wall socket. The LED (5)
on the solar module lights up green during charging process. The
All manuals and user guides at all-guides.com
Operation
to
the
3
13
6
7
4
5
Publicité
