Publicité
3.1
general transmitter layout
note:
The remote control is optional for the GX36-1 and GX42 models.
Transmission
Flame ON
Power
(ON/OFF)
Function
Adjustment
Cycle Through Functions
3.2
temperature display
A. With the system in the off position, press the temperature key
and the mode key at the same time to change from degrees ºF to
ºC.
B. Look at the LCD screen on the transmitter to verify that a ºC or ºF
is visible to the right of the room temperature display.
Blower
Remote Control
3.0 remote control layout
remote control layout
Key Lock
Low battery alarm
Room
Temperature
CPI mode
Light
note:
Install the 3 'AAA'
batteries into the
remote control, as
shown, then press
the ON button. The
battery holder will
beep 4 times to
indicate that the
remote's command is
accepted.
°F
73
EN
°C
23
13
W415-2767 / A / 10.08.19
Publicité
