Publicité
PACKAGE CONTENTS
HARDWARE KIT (not actual size)
AA
DD
IMPORTANT SAFETY INFORMATION
Read entire installation procedure before you begin!
1. DO NOT USE THIS FIXTURE IN A CIRCUIT HAVING A DIMMER CONTROL IN
THE CIRCUIT.
2. Do not look directly at LEDs for extended period of time.
3. Install in accordance with national and local electrical codes.
4. Turn power off before servicing.
5. Do not leave bare wires exposed.
6. Use Minimum 90°C supply conductors. For additional electrical requirements,
see fixture.
7. Do NOT install near other sources of light, which can fool the built-in light sensor
into thinking it is daylight, and may prevent the proper operation of the light.
If unsure whether the electrical box is properly grounded, or the box is plastic and has no ground wire, or are unfamiliar with the methods of properly ground-
ing fixture, consult a qualified electrician.
Shut off power at the circuit breaker or fuse panel before removing the old fixture and/or installing a new one.
All manuals and user guides at all-guides.com
C
D
BB
EE
FF
A
PART
A
B
B
C
D
PART
CC
AA
BB
CC
DD
EE
FF
TOOLS REQUIRED FOR ASSEMBLY (Not Included)
8. LEDs can be damaged by electrostatic discharge shock. Before
installation, discharge yourself by touching a grounded bare metal
surface to remove this hazard.
9. The LEDs in this product are non-Serviceable.
10.Suitable for OUTDOOR wet locations.
11. This fixture is controlled by a dusk-to-dawn photo light sensor. For
the fixture to work properly, the wall switch controlling the power to
the fixture MUST be turned ON at ALL times.
12. This fixture is designed for use on a 110-120VAC, fused circuit.
13. Light to be installed in accordance with this instruction manual
or consult a qualified electrician for installation.
1
DESCRIPTION
Dusk to Dawn Sensor
Wall Plate
Glass Diffuser
LED Light Bulb
DESCRIPTION
Adjustable Mounting strap
Long Machine Screws
Machine Screws
Wire nuts
Screw cap
Hex Nuts
QTY .
1
1
8
1
QTY .
1
2
2
3
2
2
Publicité
