Fanelite FW65-DC Mode D'emploi page 18

Plug in the power cord. By using the control panel or the remote control :
IMPORTANT: Programmable remote control on several fans (not programmable on previous
versions). By default, the remote control only synchronizes with its fan, but it can be
synchronized to several fans. To do this, check that the batteries are installed in the remote
control, plug in the fan you want to take control of and within 10 seconds, press the Power
button on the remote control 4 times. At the 4th press, hold the button until you hear a beep
sound, indicating that the synchronization procedure was successful. Repeat the procedure
with all the fans you want to synchronize on the same remote.
Power ON / OFF
Press the Power button to turn on / off the fan.
Speed setting
Press the corresponding buttons to increase or decrease the speed. 6 speeds in total, speed
1 corresponds to the lowest speed and speed 6 to the highest speed. The selected speed is
displayed on the speed indicator of the control panel.
Swing
Press the Swing button to activate / deactivate the oscillating mode. The swing indicator
lights up on the control panel when the function is activated.
Types of ventilation
That fan has 3 types of ventilation : normal, natural or sleep.
- Normal mode : The fan operates in normal mode when the natural and sleep modes are
disabled. The fan operates normally according to the selected speed.
- Natural mode (feel) : Press the natural mode button, the corresponding indicator lights up
on the control panel when the function is activated. The speed indicator of the control panel
displays red lines. The fan reproduces the effect of the natural wind by alternately operating
at different speeds and intermittencies.
- Sleep mode : Press the sleep mode button, the corresponding indicator lights up on the
control panel when the function is activated. The speed indicator of the control panel displays
0, the speed is automatically set to 400 rpm (low speed), so that the fan is as quiet as
possible. The night mode is ideal in case of sensitivity to colds.
Timer
You can set the timer by pressing the Timer button so that it turns off automatically once the
selected time has been reached. Press the Timer button to set the timer, up to 9h max.
18