Publicité
Liens rapides
H-6289
SAFETY BOLLARD
CHAIN – 10'
TOOLS NEEDED
Electric Drill
Nut Driver
(Screw Gun)
Mounting Plate x 2
1. Attach mounting plate to bollard using provided
self-tapping screws and nut driver. (See Figure 1)
NOTE: Use a screw gun with an adjustable clutch.
Take care not to overtighten and strip the
threads. DO NOT USE IMPACT TYPE GUNS.
Figure 1
2. Repeat step 1 on second bollard.
PAGE 1 OF 3
1-800-295-5510
uline.com
Bit
Carabiner x 2
PARTS
Self-Tapping Screw x 8
INSTALLATION
3. Attach carabiners to mounting plates on both
bollards. (See Figure 2)
Figure 2
4. Connect chain to carabiners. (See Figure 3)
Figure 3
Para Español, vea página 2.
Pour le français, consulter la page 3.
10' Chain x 1
0523 IH-6289
Publicité
Manuels Connexes pour Uline H-6289
Sommaire des Matières pour Uline H-6289
- Page 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-6289 1-800-295-5510 uline.com SAFETY BOLLARD CHAIN – 10' TOOLS NEEDED Electric Drill Nut Driver (Screw Gun) PARTS Mounting Plate x 2 Carabiner x 2 Self-Tapping Screw x 8...
- Page 2 H-6289 800-295-5510 uline.mx CADENA DE ACERO PARA POSTE DE SEGURIDAD – 10' HERRAMIENTAS NECESARIAS Taladro Eléctrico Broca Para (Atornillador) Tuercas PARTES 2 Placas de Instalación 2 Mosquetones 8 Tornillos Autoperforantes 1 10' Cadena INSTALACIÓN Fije la placa de instalación al poste utilizando los 3.
- Page 3 H-6289 1-800-295-5510 uline.ca CHAÎNE POUR BORNE DE SÉCURITÉ EN ACIER – 10 PI OUTILS REQUIS Perceuse électrique Tourne-écrou (pistolet à vis) PIÈCES Plaque de montage x 2 Mousqueton x 2 Vis autotaraudeuse x 8 Chaîne de 10 pi x 1 INSTALLATION Fixez la plaque de montage à...