Publicité
Model: 2242
ASSeMBlY INSTRUCTIoNS
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
Remove the griddle body from the packaging and set it
STEP 01
upside down�
Install the control knob by pushing it into place in the oFF position�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Place the griddle top onto the griddle body by aligning the
STEP 03
Make sure the front pins are fully
two (2) front pins with the front locking holes�
seated in the holes, then push
the griddle top back to lock the
griddle in place�
❷ ❷
❶ ❶
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
BLACKSTONEPRODUCTS.COM/SUPPORT
CAUTIoN
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
ASSEMBLY GUIDE
NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Screw the four (4) griddle feet into the bottom of the
STEP 02
griddle body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
NOT INCLUDED:
22" griddle base
Hang the grease cup in the slot at the rear of the
STEP 04
Make sure the front pins are fully
griddle body�
seated in the holes, then push
the griddle top back to lock the
griddle in place�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
| OWNER'S MANUAL
NOT INCLUDED:
AA battery
ELECTRIC REQUIREMENTS:
120V 60Hz
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
NOT
AAA
05
Publicité
