Publicité
BLADE ATTACHMENT
Align the blade arm holes to the fan motor and secure
1
with screws and lock washers provided; tighten screws
securely. (Fig. 1)
Repeat this procedure for the remaining blade arms.
2
Align the blade holes to the blade arm and secure with
3
screws and fiber washers provided; tighten screws
securely. (Fig. 2)
4
Repeat this procedure for the remaining blades.
Cordless power screwdrivers are NOT recommended,
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
for final tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.
| hinkley.com
10
NOTE:
Screws
Fig. 1
Fig. 2
Fan Motor
Blade Arms
Screws
Blades
Blade Arms
Publicité
