Publicité
Air Intake
and Outlet
and Ventilation
Grille
Clean the Air Intake and Outlet around the Particle
Sensorand the Ventilation Grillewith a damp cloth.
Be careful not to let dust fall back into the unit.
ge.com
Ventilation grille
Intake
Particle Sensor
The Particle Sensor should be cleaned everu
2 months. It is located on the right side of the unit.
To clean:
II Open the cover.
II Use a wet cotton swab to clean the lens,
dust intake and outlet.
II Wipe with a second cotton swab to dry.
Failure to clean the sensor regularly will result in
a malfunctioning of the particle sensor.The sensor
will need to be cleaned more often depending
on the amount of dust in the area.
Lens
11
Publicité
