Télécharger Imprimer la page

Publicité

Liens rapides

QUICK START GUIDE
GUIDE DE DÉMARRAGE
SOFTWARE UPDATES REQUIRED
MISE À JOUR DES LOGICIELS REQUISE
PRIOR TO INSTALLATION
AVANT L'INSTALLATION
Your iDatastart remote has an internal rechargeable battery.
Votre télécommande iDatastart possède une batterie interne
It's powered down during shipping to conserve the battery.
rechargeable. Elle est éteinte durant le transport pour préserver
Follow the instructions below to turn ON or OFF the remote
la batterie. Suivre les instructions ci-dessous pour allumer ou
and to fully charge the battery.
éteindre la télécommande et recharger la batterie.
Power ON the remote
Allumer la télécommande
Press and hold the 'F' button for 8 seconds
Appuyer et tenir le bouton 'F' pendant 8 secondes
to turn ON the remote.
pour allumer la télécommande.
Power OFF the remote
Éteindre la télécommande
Press and hold the 'F' button for 3 seconds to enter the MENU,
Appuyer et tenir le bouton 'F' pendant 3 secondes pour entrer
scroll and select the 'Power Down' option then press and hold
dans le MENU, faire défiler et sélectionner l'option 'Éteindre'
until the remote shuts OFF.
puis appuyer et tenir jusqu'à ce que la télécommande s'éteigne.
Charge the remote battery
Recharger la batterie de la télécommande
Connect the remote to a power source
Connecter la télécommande à une source d'alimentation
(sold separately) using a micro-USB cable.
(vendue séparément) en utilisant un câble micro-USB.
Charge time is approximately 2 hours.
Le temps de recharge est d'environ 2 heures.

Publicité

loading

Sommaire des Matières pour ADS iDatastart

  • Page 1 MISE À JOUR DES LOGICIELS REQUISE PRIOR TO INSTALLATION AVANT L’INSTALLATION Your iDatastart remote has an internal rechargeable battery. Votre télécommande iDatastart possède une batterie interne It’s powered down during shipping to conserve the battery. rechargeable. Elle est éteinte durant le transport pour préserver Follow the instructions below to turn ON or OFF the remote la batterie.
  • Page 2 SOFTWARE UPDATES REQUIRED MISE À JOUR DES LOGICIELS REQUISE Prior to installation, your iDataStart remote control and antenna must be Avant l’installation, votre télécommande et votre antenne iDataStart doivent flashed with the latest software via the Weblink Desktop application. To être actualisées avec les derniers logiciels via l’application Weblink Desktop.