Publicité
Quick Start
The 1st dog
Both dogs
6
The 2nd dog
Step 6:
Match the receiver and transmitter. Press the
three buttons under dog A mode, the first receiver will be
paired along with red light turns off and blue light starts
flash; If you have another receiver, turn it on and press
the three buttons under dog B mode, the second receiver
will be paired; If you need to train2 dogs simultaneously,
press two buttons under dog AB mode, both receivers will
be controlled.
7
-03-
Step 7:
Check the button function. Push the beep
button, the receiver will produce beeping sound and
similarly, push the vibrate button, it will cause
vibration. Cap the shock test kit on the metal prongs,
push the shock button. If the bulb lights up, the shock
function is ok.
Tip 3: The duration for pressing the vibrate or shock button will
lead to difference on the length of the vibration or shock time.
Tip 4:After 3 minutes of inactivity, transmitter will go into sleep
mode. You can wake it up by pressing any function keys.
Step 8:
Start to train the dogs. Put the collar into the
receiver and wear the receiver around dog's neck. Remember
to leave one finger place between the collar and the neck,
and then you can train the dogs.
Publicité
