Redlion RL-WCS50TA Manuel Du Propriétaire

OWNER'S MANUAL
Sewage Basin System RL-WCS50TA
The RL-WCS50TA Sewage Basin System is ideal for the collection and
removal of sewage, effluent, drainage, or seepage water from low lying
areas.
This product is covered by a Limited Warranty for a period of 2 years from the
date of original purchase by the consumer. For complete warranty informa-
tion, refer to redlionproducts.com.
SAFETY INSTRUCTIONS
This equipment should be installed and serviced by technically qualified personnel who are familiar with
the correct selection and use of appropriate tools, equipment, and procedures. Failure to comply with
national and local electrical and plumbing codes and within Red Lion recommendations may result in elec-
trical shock or fire hazard, unsatisfactory performance, or equipment failure.
Know the product's application, limitations, and potential hazards. Read and follow these instructions and
those provided with the pump carefully to avoid injury and property damage. Do not disassemble or repair
unit unless described in this manual.
Failure to follow installation or operation procedures and all applicable codes may result in the following
hazards:
Risk of severe injury or death by electrical shock.
• Check local electrical and building codes before installation. The installation must be in accordance
with their regulations as well as the most recent National Electrical Code (NEC) and the Occupational
Safety and Health Act (OSHA).
Risk of bodily injury, electric shock, or equipment damage.
• This equipment must not be used by children or persons with reduced physical, sensory or mental
abilities, or lacking in experience and expertise, unless supervised or instructed. Children may not
use the equipment, nor may they play with the unit or in the immediate vicinity.
• Operation of this equipment requires the detailed installation and operating instructions provided in
this manual and the pump manual. Read entirety of all manuals before starting installation and
operation. End User should receive and retain all manuals for future use.
• Keep safety labels clean and in good condition.
• Keep work area clean, well-lit, and uncluttered.
• Wear safety glasses while installing or performing maintenance on the pump.
EN
English