Publicité
6. Before First Use
D ANGER
Risk of suffocation!
Keep any packaging materials away from children and
pets – these materials are a potential source of danger, eg
suffocation.
» Remove all the packing materials
» Remove and review all components before use
» Check the appliance for transport damages
7. Assembly
1 Push the suction nozzle (A) onto the suction head (C) (Fig 1)
1
2 Open the hook and loop closure on the cleaning pad (K)
Slide one side of the wiper (L) into the closed loop on the
cleaning pad (K)
Then slide the other side of the wiper (L) into the open hook
and loop closure of the cleaning pad (K) (Fig 2)
Close the hook and loop closure on the cleaning pad (K)
2
2
3
1
8. Operation
8.1 Charging the appliance
NOTICE
» Fully charge the appliance before using it for the first time,
which take about 35 hours
» Charge the appliance when the suction power is noticeably
weaker and the indicator light (H) flashes red.
» The appliance has a built-in thermal protection If the
appliance halts its charging, this may be due to the battery
temperature reaching approximately 158°F (70°C). Wait for
the appliance's battery temperature to become normal to
continue charging
1 Attach the plug (R/S/T) to the AC adapter (Q) Rotate the
plug (R/S/T) clockwise to lock it in place (Fig 3)
3
1
US/JP
UK
EU
NOTICE
To detach the plug (R/S/T) from the
AC adapter (Q), press the plug release button (U) and rotate
the plug (R/S/T) counterclockwise
2 Connect the AC adapter (Q) to the charging port (G) on the
motor unit (D) and then to the outlet (Fig 4)
4
2
3 The indicator light (H) keeps flashing until charging has
finished. Once the appliance is fully charged, the indicator
light (H) remains solid until unplugged The charging cycle
takes around 25-35 hours
EN
2
1
5
Publicité
