Publicité
Assembly
1
Attaching the "X" shape support bar
to the connector
□
Attach the "X" shape support bar (B) to the connector (C)
using M6x20 mm bolts (BB) and M6 washers (CC).
□
Tighten all M6x20 mm bolts (BB) with the M6 socket
wrench (EE).
□
Cover the bolt heads with M6 bolt caps (DD).
B
C
3
Attaching the table base to the connector
□
Attach the table base (D) to the connector (C) using M6x20mm
bolts (BB) and M6 washers (CC).
□ Tighten all M6x20mm bolts (BB) with the M6 socket
wrench (EE).
□ Cover the bolt heads with bolt caps (DD).
D
B
A
2
□
Attach the "X" shape support bar (B) to the table top (A) using
□
□
DD
BB
CC
B
4
□ Turn the table over. The table is now ready for use.
DD
BB
CC
C
4
Attaching the "X" shape support bar
to table top
M6x40 mm bolts (AA) and M6 washers (CC).
Tighten all M6x40 mm bolts (AA) with the M6 socket wrench (EE).
Cover the bolt heads with M6 bolt caps (DD).
NOTE: Please ensure all M6 bolts are aligned and
assembled correctly. Fully tighten the bolts.
C
A
Positioning the table
DD
AA
CC
Publicité
