Télécharger Imprimer la page

Scheppach C-ID180-X Traduction Du Mode D'emploi Original page 13

Publicité

Table of contents
1
Introduction ........................................................
2
Product description (fig. 1) .................................
3
Scope of delivery (Fig. 1) ...................................
4
Proper use..........................................................
5
Safety instructions..............................................
6
Technical data....................................................
7
Unpacking ..........................................................
8
Operation ...........................................................
9
Working instructions...........................................
10 Cleaning and maintenance ................................
11 Storage...............................................................
12 Repair & ordering spare parts ............................
13 Disposal and recycling .......................................
14 Troubleshooting .................................................
15 Warranty conditions - Scheppach 20V IXES se-
ries .....................................................................
16 EU Declaration of Conformity.............................
17 Exploded view .................................................... 209
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear safety goggles.
Wear hearing protection.
If dust builds up, wear respiratory protection!
Lithium-ion battery
The product complies with the applicable
European directives.
1
Introduction
13
Manufacturer:
13
Scheppach GmbH
13
Günzburger Straße 69
14
D-89335 Ichenhausen
14
Dear Customer
16
We hope your new product brings you much enjoyment
and success.
17
Note:
17
In accordance with the applicable product liability laws,
18
the manufacturer of this product assumes no liability for
18
damage to the product or caused by the product arising
from:
19
• Improper handling
19
• Non-compliance with the operating manual
19
• Repairs carried out by third parties, unauthorised spe-
20
cialists
• Installing and replacing non-original spare parts
20
• Improper use
22
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper and
economic operation of the product, for avoiding danger,
for minimising repair costs and downtimes and for in-
creasing the reliability and extending the service life of the
product. In addition to the safety instructions in this oper-
ating manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety instruc-
tions before using the product. Only operate the product
as described and for the specified areas of application.
Keep the operating manual in a good place and hand
over all documents when passing the product on to third
parties.
2
Product description (fig. 1)
1.
Tool receiver
2.
Locking sleeve
3.
Battery*
4.
Battery mount
5.
Release button (battery)
6.
LED work lamp
7.
On/off switch
8.
Rotational direction switch
9.
Belt clip
10.
Screw
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item
Quantity
9.
1 x
10.
1 x
1 x
1 x
www.scheppach.com
Designation
Belt clip
Screw
Cordless impact screwdriver
Operating manual
GB | 13

Publicité

loading

Ce manuel est également adapté pour:

5909245900