Controls And Functions; Led Definitions; Liberty-Mic Operation - PRESIDENT LIBERTY-MIC Manuel D'utilisation

English

CONTROLS AND FUNCTIONS

1 - PUSH-T0-
TALK button
2 - SYNC/
Power On/Off
button
3 - Mini-USB Charging Port
LED (4) DEFINITIONS
Color
Green
Red
All
Green
Red
Green
Red
Orange/Green
Orange/Red
Green/Red
All

LIBERTY-MIC OPERATION

SETTING UP YOUR MICROPHONE
Install batteries in mic
1. Remove the back battery cover.
2. Insert the Ni-MH (E) battery, connecting it to the mic at the plug.
3. Replace the back cover.
4. Use the DC charger (D) to charge battery completely before using.
Mount the microphone cradle
1. Mount the cradle (B) using the supplied screws.
2. Disconnect the current wired mic
3. Connect cradle (B) in place of the microphone.
4. Turn on CB. The cradle LED (4) flashes red while it powers up, then becomes solid red.
6 - Speaker
5 - Microphone
4 - LED
Wireless microphone
Status
Solid On
Solid On
Off
Long Flash
Long Flash
Short Stutter
Short Stutter
Short Flash
Short Flash
Long Flash
Long Flash
7 - VOL UP
button
8 - VOL
DOWN
button
11 - audio
Meaning
Linked, battery charged
Linked, low battery
Powered down
Transmitting, battery charged
Transmitting, low battery
Registration mode, battery charged
Registration mode, low battery
Not linked, battery charged
Not linked, low battery
Charging, battery not full
Unregistered
- 14 -
Cradle
9 - LED
10 - FIND/
SYNC
Button
plug