Operation
Storing food
To get the best results from your appliance, follow these instructions:
•
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
•
Ensure GN container bays are full at all times, even if the GN containers are unused or empty.
Empty bays will greatly reduce efficiency of the appliance.
•
Always close the door, lid or drawer when not in use.
•
Do not place uncovered hot food or liquid inside the appliance.
•
Wrap or cover food where possible.
•
Do not obstruct the fan inside the appliance.
•
Avoid opening the doors for prolonged periods of time.
•
The food must be put into container before placed into cabinet or on the shelf. Food must not be
placed into food cabinet directly.
Turn on
•
Close the door of the appliance.
•
Ensure the power switch is set to [O] then connect to the power outlet.
•
Switch on the Power [I]. The current temperature within the appliance is displayed.
•
The
on the control panel will flash to indicate a delay to compressor start.
Open/ Close the lid or drawer
•
Lift the lid up and back so the hinge settles into the support slot.
•
Lift the lid up and completely back so the GN container trays are completely exposed.
WARNING: The sliding lid does not have a locking mechanism. Always make sure that the lid is in the 'half-
open' position before opening.
WARNING: Do not pull the drawer out of its full open position to avoid any hurt.
GB
7
P2M005STD-Ver1.2