Publicité
Additional information
Problem
Considerable noise in radio
broadcasts.
Auto tuning does not pick up
some stations.
Display says "Station not
available".
I can not access secondary
services.
A "burbling" sound is heard on
some stations. (DAB like other
digital media is good at
producing quality audio from a
weak signal. However, if the
signal level is too low, a
"burbling" sound may
sometimes be heard.)
Remedy
• Connect the AM antenna and adjust the direction and position for best
reception. You may also connect an external indoor or outdoor AM
antenna (page 27).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall. You may also connect an outdoor FM antenna (page 27).
• Turn off other equipment that may be causing the noise or move it
further away.
• The radio signal is weak. Auto tuning will only detect radio stations with
a good signal. For more sensitive tuning, connect an outdoor antenna
(page 27).
• Check that DAB antenna is connected (page 7).
• At the time of publishing this manual not many secondary services are
available, this will increase as more DAB stations start broadcasting.
• If a secondary service station is available, the SECONDARY indicator
will light blue.
• Try repositioning your antenna to gain maximum signal strength.
07
29
En
Publicité
