Publicité
All manuals and user guides at all-guides.com
c) Mounting
Mount the device using the supplied screws and dowels (if needed),
or place it on top of a smooth flat horizontal surface such as a desk
or countertop.
•
Use the holes on the mounting plate as a template to mark
where to drill the holes.
•
Use a ø6 mm diameter bit to drill the holes.
If needed, insert the plastic dowels using a mallet.
•
Fix the mount to the wall using the supplied screws.
•
Screw the device onto the mount.
•
Make sure the device is securely attached before letting go.
34
For maximum coverage, the "Basetech" logo should be
facing forward so the camera is in a neutral position
and has scope to pan and tilt equally in all directions.
Unscrew the wall mount bracket if placing onto a
desktop.
The device can be placed on a desk or mounted to a
wall or ceiling.
If mounted upside down, you will need to flip the image
using the V12 app "Image Settings".
Publicité
