BEFORE PUTTING INTO USE
©
Before connecting the appliance to the power supply, let the unit stand
upright for 4 hours, which will reduce the possibility of the cooling system
malfunctioning due to improper handling.
©
Clean your unit thoroughly before putting into use. (See "How to Clean")
©
Use the parts diagram on page 4 to insure proper positioning of internal
components.
TIPS FOR ENERGY SAVINGS
@
Keep the refrigerator and freezer doors closed as much
as possible,
particularly in warm / humid conditions.
©
Maintain adequate ventilation around the back and sides of the unit.
©
Maintain a thermostat setting of "4" under normal use.
@
Allow warm
food to cool to room temperature
before placing in the
refrigerator
or freezer.
©
Excessive ice build up will increase energy consumption.
Defrost the unit
when ice / frost is 4" thick.
IMPORTANT SAFETY INSTRUCTIONS
DANGER: Risk of child entrapment. Before you throw away your old refrigerator
or freezer:
@ Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
@
The appliance must be correctly connected to the power supply. (See: "HOW
TO INSTALL").