Publicité
GENERAL SAFETY
INSTRUCTIONS
Before installing your machine, take a moment
to familiarise yourself with the following:
the following symbols will allow you to recognise
dangerous situations, situations where you
should take precautions so as not to damage
the machine and provide you with the necessary
information to manage it in the best possible way.
Do not use outdoors.
Do not use with wet hands or bare feet.
Do not expose the machine to atmospheric agents,
even if it is not connected to the mains.
Do not put your hands, metal objects and anything
else into the machine, even if it is not connected to
the mains.
Do not allow the appliance to be used by children
under the age of 8 and by people with reduced
physical, sensory or mental abilities, or without prior
experience or the necessary knowledge, unless
they are under supervision or if they have received
instructions relating to using the appliance and an
understanding of the inherent dangers. Children
must not play with the appliance. Cleaning and
maintenance to be performed by the user must
not be carried out by children without appropriate
supervision.
Absolutely do not open the closing lever of the pod
housing compartment during dispensing.
Before any maintenance, contact our Support
Centre's specialised personnel. To find out where
they are go to www.faberitaliasrl.it
DANGER
WARNING/CAUTION
USEFUL TIPS
Periodically check the integrity of the power
cable which must only be replaced by authorised
personnel.
If the power cable is damaged, it must be
replaced by the manufacturer or by a servicing
company or a similarly qualified person in order to
avoid hazards.
Maintenance and cleaning operations must
always be carried out when the machine is cooled
down and disconnected from the mains.
To clean the machine use a simple damp cloth,
taking care to never immerse the machine in
water or put the components in the dishwasher.
Do not use solvents or aggressive chemical
products.
Take care to never dry the machine or its
components in the oven (of any kind).
If you find water residue inside the circuits,
it is because our machines are tested one by
one after assembly.
19
Publicité
