INFOSEC UPS SYSTEM X4 SINUS RT 1500 VA Notice D'utilisation page 6

2.2 Install the UPS
For safety consideration, the X4 SINUS RT is shipped without connecting battery wires.
Before installing the UPS, please follow the steps below to re-connect battery wires.
 Step 1  Step 2  Step 3
Connect the AC input and Put the front panel back to the
Remove front panel.
re-connect battery wires. unit.
Rack-mount installation
 
Step 1 Step 2
Tower installation
  
Step 1 Step 2 Step 3
2.3 Setup the UPS
 Step 1 - UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension
cords.
Avoid using extension cords.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
6
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 07 11 AA 59 203 06