ONFORU FL30 Manuel D'instructions

Introduction
This LED lighting fixture is consisted of high power
LEDs ,which is an environmental, energy-saving and
the best solution of replacements for conventional
Lightings. Various white colors configurations are
available, such as cool white,warm white, natural
white color.
Features & Applications
(1) extended-aluminium housing, 4mm toughened
glass, Ip66.
(2) As a decorative product, Could be widely used for
sculptures, landmark buildings, stadiums, plazas,
gardens, public parks and so on, especially used in
virescence, the wall of highrises, landscapes etc.
Technology Parameter
NO Item
1
Operating voltage
Max power
2
FL30 FLHL40K
consumption
3
Beam angle
4
LED Color
5
Operating humidity
6
Operating temperature
7
IP Rating
8
Life time
9
Projection distance
10
Net Weight
11
Max projected area
12
Mounting height
13
Dimension ( mm)
Suitable for wet locations
Installation Instruction(Only by an approved
electrician)
FL30/FLHL40K/FLHL50
FLHL60K/FLHL70/FLHL80K/FLHL100K
Parameter scope
AC120V-277V 50Hz/60Hz
FLHL50 FLHL60K FLHL70 FLHL80K
60*120°
White
10-90%
-40～40℃
IP66
50000h
20-25m
0.62kg 1.1kg 1.3kg
2
190x122mm
3m-6m 4m-8m 6m-10m
150x105x57
215x150x65
INSTALLATION
lntegral adjustable knuckle with 1/2-14NPS threaded pipe,
yoke, or slipftter attachment,facilitates quick and easy
installation to a variety of mounting accessories.
Maintenances
1. In order to the life time of the product and more safe
operation,please keep it clean,maintenance and preserve.
2. While cleaning the lamp, please use the soft cloth with
soap water and wring it, then try to sweep.
3. Don't use the volatile chemic liquid such as alcoholic,
gasoline or pesticide to sweep, otherwise, easily damage
the lamp, thereby affect the life time of it.
4. Fragile glass, handle with care，The non-artficial damage
of glass,can be replaced.
Cautions
1. Make sure that the product is installed Before plug in.
2. Please notice that don't use any objectives to cover the
FLHL100K
lamp.
3. Don't use the lamp under sealed environment.
4. Maintenance should only be done by a professional
technician.
5. In case of any change to the product we retain the right
to inform you in advance.
6. If the external flexible cable or cord of this luminaire is
damaged,it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified
1.45kg
person in order to avoid a hazard.
7. Avoid the sensor exposed to other light, otherwise it
will cause the flashing of the lamp.
8. Terminal block to be used shall conform toEN 60998-2-1
or EN 60998-2-2 or UL certified and shall be specified as.
following :
- the type of terminal: screw/screwless;
- number of terminals: 3 poles;
- rated voltage: Min. 277 V;
- rated connecting capacity: Min. 1,0mm2;
- any necessary preparation of the ends of conductors: the
length of exposed ends of conductors shall not more than
8mm;- any fixing method: fixed inside the connecting box.
Notes:
Do not dispose of electrical appliances as unsorted
municipal waste, Use separate collection facilities.
Contact you local government for Information regarding
the collection systems available. If electrical appliances
Are groundwater and get into the food chain, damaging
your health and well-being.