Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support PORCH SWING USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 3
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 4
SAFETY INSTRUCTIONS WARNING: Read this instructions carefully before using this product. Failure to do so can result in serious injury. Assembly precautions 1. Assemble only should be according to these instructions. Improper assembly can result in hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Page 6
ASSEMBLY STEP STEP1 Install support plates 5 on seat 1 with parts A, B and C. STEP2 Install the left and right handrails 3,4 on the support plate 5 and tighten them with screw D.In order to install a perfect swing, we recommended you to tighten D after completing step3.
Page 7
STEP3 Connect the backrest 2 to the seat 1 with parts A, B, and C,install cup brackets 7 to 3 and 4 with L respectively. STEP4 Connect armrests 3,4 to backrest 2 with parts F,G,H, and E,G,H to the front hole of the seat noting that the holes of parts E and F facing forward.
Page 8
Chains 6 is connected to parts E and F through hanging ring l, and part l is tightened according to the figure to complete the installation. PRODUCT PARAMETER Specification 65*25.6 inch(seat size) Size(mm) 1702*710*600 White Colour Brown Type 5.5ft with saucer China fir Main material...
Page 9
Address:Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The...
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 13
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support HUŚTAWKA P ORCH INSTRUKCJA OBSŁUGI We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 16
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 17
SAFETY INSTRUCTIONS OSTRZEŻENIE: Przeczytaj uważnie niniejszą instrukcję przed użyciem tego produktu. Niezastosowanie się do tego może spowodować poważne obrażenia. Środki ostrożności podczas montażu 9. Montaż powinien odbywać się wyłącznie zgodnie z niniejszą instrukcją. Nieprawidłowy montaż może powodować zagrożenia. 10. Podczas montażu należy nosić okulary ochronne i wytrzymałe rękawice robocze zatwierdzone przez ANSI.
Page 19
ASSEMBLY STEP KROK 1 Zamontuj płyty wsporcze 5 na gnieździe 1 z częściami A, B i C. KROK 2 Zamontuj lewą i prawą poręcz 3,4 na płycie nośnej 5 i dokręć je śrubą D. Aby zamontować idealną huśtawkę, zalecamy dokręcenie D po wykonaniu kroku 3 .
Page 20
KROK 3 Połącz oparcie 2 z siedziskiem 1 za pomocą części A, B i C, zamontuj wsporniki misek 7 do 3 i 4 odpowiednio za pomocą L. KROK 4 Połącz podłokietniki 3,4 z oparciem 2 częściami F, G, H i E, G, H z przednim otworem siedziska, zwracając uwagę, aby otwory części E i F były skierowane do przodu.
Page 21
KROK 5 Łańcuchy 6 są połączone z częściami E i F poprzez pierścień do zawieszania l, a część l jest dokręcona zgodnie z rysunkiem, aby zakończyć instalację.
Page 22
PRODUCT PARAMETER Specyfikacja 65 *25,6 cal (rozmiar siedziska) Rozmiar (mm) 1702*710*600 Biały Kolor brązowy Uprzejmy 5,5 metra ze spodkiem Jodła chińska Glowny material Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Szanghaj...
Page 23
Import do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Import do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com Tel: 01772418127...
Page 26
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support...
Page 27
Technisch Support- und E-Garantie-Zertifikat www.vevor.com/support VERANDA - SCHAUKEL BEDIENUNGSANLEITUNG We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 30
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 31
SAFETY INSTRUCTIONS WARNUNG: Lesen Sie diese Anweisungen sorgfältig durch, bevor Sie dieses Produkt verwenden. Andernfalls kann es zu schweren Verletzungen kommen. Vorsichtsmaßnahmen bei der Montage 17. Der Zusammenbau sollte nur gemäß dieser Anleitung erfolgen. Durch unsachgemäße Montage können Gefahren entstehen. 18.
Page 33
ASSEMBLY STEP SCHRITT 1 Stützplatten 5 am Sitz 1 mit den Teilen A, B und C montieren. SCHRITT 2 Montieren Sie den linken und rechten Handlauf 3,4 auf der Stützplatte 5 und ziehen Sie sie mit der Schraube D fest . Um eine perfekte Schaukel zu installieren, empfehlen wir Ihnen , D nach Abschluss von Schritt 3 festzuziehen .
Page 34
SCHRITT 3 Verbinden Sie die Rückenlehne 2 mit dem Sitz 1 mit den Teilen A, B und C und montieren Sie die Schalenhalterungen 7 an 3 und 4 mit L. SCHRITT 4 Verbinden Sie die Armlehnen 3,4 mit der Rückenlehne 2, wobei die Teile F,G,H und E,G,H mit dem vorderen Loch des Sitzes verbunden werden.
Page 35
Teil E und F den Ring l jeweils ein. SCHRITT5 Die Ketten 6 werden über den Aufhängering l mit den Teilen E und F verbunden und Teil l wird gemäß der Abbildung festgezogen, um die Installation abzuschließen.
Page 37
Importiert nach AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien In die USA importiert: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com...
Page 40
Technisch Support- und E-Garantiezertifikat www.vevor.com/support...
Page 41
Technique Assistance et certificat de garantie électronique www.vevor.com/support BALANÇOIRE DE PORCHE MANUEL D'UTILISATION...
Page 42
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 44
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 45
SAFETY INSTRUCTIONS AVERTISSEMENT: Lisez attentivement ces instructions avant d'utiliser ce produit. Ne pas le faire peut entraîner des blessures graves. Précautions de montage 25. L'assemblage doit uniquement se faire selon ces instructions. Un assemblage incorrect peut entraîner des dangers. 26. Portez des lunettes de sécurité approuvées par l'ANSI et des gants de travail robustes pendant l'assemblage.
Page 47
ASSEMBLY STEP ÉTAPE 1 Installer les plaques de support 5 sur le siège 1 avec les pièces A, B et C. ÉTAPE 2 Installez les mains courantes gauche et droite 3,4 sur la plaque support 5 et serrez-les avec la vis D. Afin d'installer une balançoire parfaite, nous vous recommandons de serrer D après avoir terminé...
Page 48
ÉTAPE 3 Connectez le dossier 2 au siège 1 avec les pièces A, B et C, installez les supports de coupelle 7 à 3 et 4 avec L respectivement. ÉTAPE 4 Connectez les accoudoirs 3,4 au dossier 2 avec les pièces F, G, H et E, G, H au trou avant du siège en notant que les trous des pièces E et F sont orientés vers l'avant.
Page 49
ÉTAPE5 Les chaînes 6 sont reliées aux pièces E et F via l'anneau de suspension l, et la pièce l est serrée selon la figure pour terminer l'installation.
Page 51
Importé en Australie : SIHAO PTY LTD, 1 ROKEVA STREETASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com...
Page 54
Technique Assistance et certificat de garantie électronique www.vevor.com/support...
Page 55
Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support VERANDASCHOMMEL GEBRUIKERSHANDLEIDING _ _ We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 58
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 59
SAFETY INSTRUCTIONS WAARSCHUWING: Lees deze instructies zorgvuldig door voordat u dit product gebruikt. Als u dit niet doet, kan dit leiden tot ernstig letsel. Voorzorgsmaatregelen voor montage 33. Alleen de montage dient volgens deze instructies te gebeuren. Onjuiste montage kan tot gevaren leiden. 34.
Page 61
ASSEMBLY STEP STAP 1 Installeer steunplaten 5 op stoel 1 met onderdelen A, B en C. STAP 2 Monteer de linker en rechter leuningen 3,4 op de steunplaat 5 en draai ze vast met schroef D. Om een perfecte schommel te installeren, raden wij u aan om D na het voltooien van stap 3 vast te draaien .
Page 62
STAP 3 Verbind de rugleuning 2 met de zitting 1 met de delen A, B en C, monteer respectievelijk de bekerbeugels 7 t/m 3 en 4 met L. STAP 4 Sluit de armleuningen 3,4 aan op de rugleuning 2 met de onderdelen F,G,H en E,G,H aan het voorste gat van de stoel, waarbij u erop let dat de gaten van de onderdelen E en F naar voren wijzen.
Page 63
respectievelijk aan. STAP 5 Kettingen 6 zijn verbonden met delen E en F via ophangring l, en deel l wordt vastgezet volgens de figuur om de installatie te voltooien.
Page 64
PRODUCT PARAMETER Specificatie 65 *25,6 inch (zitmaat) Grootte (mm) 1702*710*600 Kleur Bruin Vriendelijk 5,5ft met schotel Chinese spar Hoofd materiaal Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai...
Page 65
Geïmporteerd naar AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com...
Page 68
Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support...
Page 69
Teknisk Support och e-garanticertifikat www.vevor.com/support P ORCH SWING ANVÄNDARMANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 71
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 72
SAFETY INSTRUCTIONS VARNING: Läs dessa instruktioner noggrant innan du använder denna produkt. Underlåtenhet att göra det kan resultera i allvarliga skador. Försiktighetsåtgärder vid montering 41. Endast montering ska ske enligt dessa instruktioner. Felaktig montering kan leda till faror. 42. Använd ANSI-godkända skyddsglasögon och kraftiga arbetshandskar vid montering.
Page 74
ASSEMBLY STEP STEG 1 Montera stödplattor 5 på säte 1 med delarna A, B och C. STEG 2 Montera vänster och höger ledstänger 3,4 på stödplattan 5 och dra åt dem med skruv D. För att installera en perfekt svängning rekommenderar vi att du drar åt D efter att ha slutfört steg 3 .
Page 75
STEG 3 Anslut ryggstödet 2 till sätet 1 med delarna A, B och C, montera skålfästen 7 till 3 och 4 med L respektive. STEG 4 Anslut armstöd 3,4 till ryggstöd 2 med delarna F,G,H och E,G,H till det främre hålet på...
Page 76
STEG 5 Kedjorna 6 är anslutna till delarna E och F genom hängringen l, och del l dras åt enligt figuren för att slutföra installationen.
Page 78
Importerad till AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com Tel: 01772418127...
Page 81
Teknisk Support och e-garanticertifikat www.vevor.com/support...
Page 82
Técnico Soporte y certificado de garantía electrónica www.vevor.com/support MANUAL DE USUARIO DEL COLUMPIO PARA PORCHE We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 85
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 86
SAFETY INSTRUCTIONS ADVERTENCIA: Lea atentamente estas instrucciones antes de utilizar este producto. De lo contrario, se pueden producir lesiones graves. Precauciones de montaje 49. El montaje únicamente debe realizarse de acuerdo con estas instrucciones. Un montaje inadecuado puede provocar peligros. 50.
Page 88
ASSEMBLY STEP PASO 1 Instale las placas de soporte 5 en el asiento 1 con las piezas A, B y C. PASO 2 Instale los pasamanos izquierdo y derecho 3,4 en la placa de soporte 5 y apriételos con el tornillo D. Para instalar un giro perfecto, le recomendamos apretar D después de completar el paso 3 .
Page 89
PASO 3 Conecte el respaldo 2 al asiento 1 con las piezas A, B y C, instale los soportes para tazas 7 a 3 y 4 con L respectivamente. ETAPA 4 Conecte los reposabrazos 3,4 al respaldo 2 con las piezas F,G,H y E,G,H al orificio delantero del asiento teniendo en cuenta que los orificios de las piezas E y F miran hacia adelante.
Page 90
PASO 5 Las cadenas 6 se conectan a las partes E y F a través del anillo colgante l, y la parte l se aprieta según la figura para completar la instalación.
Page 91
PRODUCT PARAMETER Especificación 65 *25,6 pulgadas (tamaño del asiento) Tamaño (mm) 1702*710*600 Blanco Color Marrón Amable 5,5 pies con platillo abeto chino Material principal Dirección: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi...
Page 92
Shanghai Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com...
Page 95
Técnico Certificado de soporte y garantía electrónica www.vevor.com/support...
Page 96
Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support ALTALENA PER PORTICO MANUALE UTENTE We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 99
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 100
SAFETY INSTRUCTIONS AVVERTIMENTO: Leggere attentamente queste istruzioni prima di utilizzare questo prodotto. In caso contrario si potrebbero causare lesioni gravi. Precauzioni per il montaggio 57. Solo il montaggio deve avvenire secondo queste istruzioni. Un montaggio improprio può causare pericoli. 58. Indossare occhiali di sicurezza approvati ANSI e guanti da lavoro pesanti durante il montaggio.
Page 102
ASSEMBLY STEP PASSO 1 Installare le piastre di supporto 5 sul sedile 1 con le parti A, B e C. PASSO 2 Installare i corrimano sinistro e destro 3,4 sulla piastra di supporto 5 e serrarli con la vite D. Per installare un'oscillazione perfetta, si consiglia di serrare D dopo aver completato il passaggio 3 .
Page 103
PASSO3 Collegare lo schienale 2 al sedile 1 con le parti A, B e C, installare le staffe della tazza da 7 a 3 e 4 con L rispettivamente. PASSO4 Collegare i braccioli 3,4 allo schienale 2 con le parti F,G,H ed E,G,H al foro anteriore del sedile notando che i fori delle parti E ed F sono rivolti in avanti.
Page 104
PASSO5 Le catene 6 sono collegate alle parti E ed F tramite l'anello di sospensione l, e la parte l viene serrata secondo la figura per completare l'installazione.
Page 105
PRODUCT PARAMETER Specifica 65 *25.6 pollici (dimensione del sedile) Dimensioni (mm) 1702*710*600 Bianco Colore Marrone Tipo 5,5 piedi con piattino Abete della Cina Materiale principale Indirizzo: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi...
Page 106
Shanghai Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli Stati Uniti: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,Germany euvertreter@gmail.com +49 1727041930 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom pooledas123@gmail.com...
Page 109
Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support...